Static Paint, FDA Paint, Antistatic Products

Static Paint® is a commercially proven anti-static paint which can be used on floors, walls, railings, ceilings. (concrete, wood, wallboard, metal) It is easy to apply, water-based, low-odor, soap and water clean-up.

Static Paint® is used in OEM facilities, computer and electronics assembly areas, data centers/ IT rooms, warehouses, commercial buildings. Use anywhere static build-up needs to be eliminated.

Application: Can be rolled, brushed or sprayed.

Coverage: Approx. 200 sq. ft per gallon. Approx. 8-10 mil wet laydown. Two coats are recommended.

Conductivity: (two options)

Static Dissipative Range: Permanent conductivity in the range of 107 – 109 ohms.

Conductive Range: Permanent conductivity in the range of 103 – 105 ohms.

Anti-Dust: Dissipates static charge which attracts dust. Reducing static electricity to a surface will result in dust not being able to cling to the surface, greatly reducing dust build-up. Great for dust control!

For added grounding protection, we recommend using our GroundHog® grounding plate after applying our Static Paint® to floors.

Compliance: Static Paint® contains no lead, cadium, mercury, hexavalent chromium, polybrominated biphenyls (PBB) or polychlorinated diphenyl ethers (PCDE). Meets mil spec B-87105-B. Meets California VOC regulations for low VOCs. No ozone depleting chemicals. Non-hap, non-sara, non-hazardous, water-based, non-flammable, clean-up with soap and water. Plastic cans and pails can be recycled.

Durability: Static Paint® stands up to wear and tear. No hot spots. No outgassing. Interior/Exterior

Colors: Static Paint® is available in all colors. Custom colors are available at no additional charge.

Packaging: Available in 1-gallon cans or 5-gallon pails. (1-gallon minimum order)

Finish: Durable low-sheen only

Made in the USA.


FDA Paint

Meets FDA requirements (21 CFR 175.300) for direct food contact.Static Paint, fda paint, Antistatic Products

FDA Paint from Antistatic Industries is a commercially proven paint which can be used on interior and exterior surfaces which requires a FDA compliant paint.

Our FDA Paint is ideal for structural steel, piping, tanks and equipment , as well as the hard usage areas of food processing plants, dairies, silos, schools, hospitals, restaurants ,corridors, public housing and public buildings.

Application: Can be sprayed, rolled or brushed. Dries to the touch within two hours and can be reapplied.

Coverage: Use 15 Mils laydown and get 200 Square Feet per Gallon

Finish: Gloss

  • Chemical and stain resistant
  • Resists splash and spillage of grease, foodstuffs and detergents.
  • Offers protection against immersion in fresh and salt water.
  • Outstanding hardness and toughness.
  • Easy to apply and clean-up
  • Low VOC’s

Availability: 2-part epoxy system. Available in 1 gallon pails.

FDA Paint is available in WHITE only.

Made in the USA. This product is safe for use in all States and European Countries.