StaticPaint

StaticPaint® from Antistatic Industries is a commercially proven anti-static paint which can be used on floors, walls...anywhere anti-static properties are required.

Our StaticPaint® is used in OEM facilities, computer assembly plants, research labs, electronic parts manufacturers, etc.

Application: Can be sprayed, rolled or brushed. Dries to the touch within two hours and can be reapplied.

Coverage: Use 15 Mils laydown and get 200 Square Feet per Gallon

Conductivity: Permanent conductivity in the range of 107 - 109 ohms sq.

For added grounding protection, we recommend using our GroundHog® grounding plate after applying our StaticPaint® to floors.

Compliance:
StaticPaint® contains no lead, cadium, mercury, hexavalent chromium, polybrominated biphenyls (PBB) or polychlorinated diphenyl ethers (PCDE). Meets mil spec B-87105-B. Meets California VOC regulations for low VOCs. No ozone depleting chemicals. Non-Hap, Non-Sara, Non-Hazardous, Water-Based, Non-flammable, clean-up with water, plastic pails can be recycled.

Durability: StaticPaint® stands up to wear and tear. Interior/Exterior. No hot spots. No outgassing.

Availability: StaticPaint® is available in all colors. Custom colors are available at no charge. Available in 1 gallon or 5 gallon pails.

Made in the USA. This product is safe for use in all States and European Countries.
 

 
FDA Paint

Meets FDA requirements (21 CFR 175.300) for direct food contact.

FDA Paint from Antistatic Industries is a commercially proven paint which can be used on interior and exterior surfaces which requires a FDA compliant paint.

Our FDA Paint is ideal for structural steel, piping, tanks and equipment , as well as the hard usage areas of food processing plants, dairies, silos, schools, hospitals, restaurants ,corridors, public housing and public buildings.

Application: Can be sprayed, rolled or brushed. Dries to the touch within two hours and can be reapplied.  

Coverage: Use 15 Mils laydown and get 200 Square Feet per Gallon

Finish: Gloss

• Chemical and stain resistant
• Resists splash and spillage of grease, foodstuffs and detergents.
• Offers protection against immersion in fresh and salt water.
• Outstanding hardness and toughness. 
• Easy to apply and clean-up
• Low VOC’s

Availability: 2-part epoxy system. Available in 1 gallon pails.

White: (Non-conductive)

Light Grey: (Static Dissipative)

Made in the USA. This product is safe for use in all States and European Countries.
 

 
Architectual Industrial/Commercial Paint

Interior/Exterior – High-abrasion resistance for high-traffic areas.

Architectual Paint from Antistatic Industries is a commercially proven non-conductive paint which can be used on floors, walls, pathways, etc. Resists snow, rain, grease. High-performance in cold temperatures. UV resistant.

Our Architectual Paint is used in commercial, industrial and residential buildings.

Application: Easy to apply and clean-up. Can be sprayed, rolled or brushed. Dries to the touch within two hours and can be reapplied.

Coverage: Use 15 Mils laydown and get 350 Square Feet per Gallon

Availability: 1-part , available in both 1 gallon or 5 gallon pails

All colors available. Custom colors available at no additional charge.

Made in the USA. This product is safe for use in all States and European Countries.

Antistatic Industries, a division of ADM Tronics Unlimited, Inc.
224 Pegasus Avenue, Northvale, New Jersey 07647 USA
Tel: 201-660-7800 Fax: 201-784-0620
email: info@antistaticindustries.com